Компьютерные сети и Связь
Bill 05 июн 2005, 19:55
!
Так вот нужна какая нить софтина которая умеет это делать по времени суток. Например дневной трафик у нас входящий в пакет 1 Гб надо разбить на 3 машины а ночью соответственно сделать так чтоб он не считался !
!
Шинкевич Владимир 05 июн 2005, 22:09
как раз на три чела - бесплатная версия. Правда надо конкретно там покопаться dopey 05 июн 2005, 23:31
#!/bin/sh #---------------------------------------------------- # delete all loaded rules # #---------------------------------------------------- ipfw -f flush ipfw -f pipe flush #---------------------------------------------------- # enable NAT on fxp0 # #---------------------------------------------------- ipfw add 110 divert natd all from any to any via fxp0 #---------------------------------------------------- # let the packets pass from and to gateway's NICS # #---------------------------------------------------- ipfw add 200 allow ip from any to 192.168.0.100 ipfw add 201 allow ip from 192.168.0.100 to any ipfw add 202 allow ip from any to 192.168.1.100 ipfw add 203 allow ip from 192.168.1.100 to any #---------------------------------------------------- # configure bandwidth and weights (dynamic shaping)# #---------------------------------------------------- ipfw pipe 100 config bw 212Kbit/s queue 25Kbytes ipfw queue 1 config pipe 100 weight 33 gred 0.002/10/30/0.1 ipfw queue 2 config pipe 100 weight 33 gred 0.002/10/30/0.1 ipfw queue 3 config pipe 100 weight 1 gred 0.002/10/30/0.1 #--------------------------------------------------------------- # assign each client its bandwidth priority (dynamic shaping) # #--------------------------------------------------------------- ipfw add 100 queue 1 all from any to 192.168.0.114 ipfw add 102 queue 2 all from any to 192.168.0.21 ipfw add 106 queue 3 all from any to 192.168.0.111 #---------------------------------------------------- # allow SHURIK # #---------------------------------------------------- ipfw add 204 allow all from any to 192.168.0.111 ipfw add 205 allow all from 192.168.0.111 to any #---------------------------------------------------- # allow DOPEY # #---------------------------------------------------- ipfw add 206 allow all from any to 192.168.0.21 ipfw add 207 allow all from 192.168.0.21 to any #---------------------------------------------------- # allow SEREGA # #---------------------------------------------------- ipfw add 208 allow all from any to 192.168.0.114 ipfw add 209 allow all from 192.168.0.114 to any #---------------------------------------------------- # count users traffic # #---------------------------------------------------- #download ipfw add 47 count all from any to 192.168.0.21 out recv fxp0 ipfw add 49 count all from any to 192.168.0.111 out recv fxp0 ipfw add 51 count all from any to 192.168.0.114 out recv fxp0 #upload ipfw add 48 count all from 192.168.0.21 to any out xmit fxp0 ipfw add 50 count all from 192.168.0.111 to any out xmit fxp0 ipfw add 52 count all from 192.168.0.114 to any out xmit fxp0 #---------------------------------------------------- # count traffic passed through server # #---------------------------------------------------- ipfw add 90 count all from any to 192.168.0.100 out recv fxp0 ipfw add 91 count all from 192.168.0.100 to any out xmit fxp0 ipfw add 92 count all from any to 192.168.1.100 out recv fxp0 ipfw add 93 count all from 192.168.1.100 to any out xmit fxp0
#!/bin/sh #---------------------------------------------------- # delete all loaded rules # #---------------------------------------------------- ipfw -f flush ipfw -f pipe flush #---------------------------------------------------- # enable NAT on fxp0 # #---------------------------------------------------- ipfw add 110 divert natd all from any to any via fxp0 #---------------------------------------------------- # let the packets pass from and to gateway's NICS # #---------------------------------------------------- ipfw add 200 allow ip from any to 192.168.0.100 ipfw add 201 allow ip from 192.168.0.100 to any ipfw add 202 allow ip from any to 192.168.1.100 ipfw add 203 allow ip from 192.168.1.100 to any #---------------------------------------------------- # configure bandwidth and weights (dynamic shaping)# #---------------------------------------------------- ipfw pipe 100 config bw 212Kbit/s queue 25Kbytes ipfw queue 1 config pipe 100 weight 33 gred 0.002/10/30/0.1 ipfw queue 2 config pipe 100 weight 33 gred 0.002/10/30/0.1 ipfw queue 3 config pipe 100 weight 33 gred 0.002/10/30/0.1 ipfw queue 4 config pipe 100 weight 1 gred 0.002/10/30/0.1 #--------------------------------------------------------------- # assign each client its bandwidth priority (dynamic shaping) # #--------------------------------------------------------------- ipfw add 100 queue 1 all from any to 192.168.0.104 ipfw add 102 queue 2 all from any to 192.168.0.11 ipfw add 104 queue 3 all from any to 192.168.0.102 ipfw add 106 queue 4 all from any to 192.168.0.101 #---------------------------------------------------- # allow SHURIK # #---------------------------------------------------- ipfw add 204 allow all from any to 192.168.0.101 ipfw add 205 allow all from 192.168.0.101 to any #---------------------------------------------------- # allow DOPEY # #---------------------------------------------------- ipfw add 206 allow all from any to 192.168.0.11 ipfw add 207 allow all from 192.168.0.11 to any #---------------------------------------------------- # allow SEREGA # #---------------------------------------------------- ipfw add 208 allow all from any to 192.168.0.104 ipfw add 209 allow all from 192.168.0.104 to any #---------------------------------------------------- # allow DOWNLOADER # #---------------------------------------------------- ipfw add 210 allow all from any to 192.168.0.102 ipfw add 211 allow all from 192.168.0.102 to any #---------------------------------------------------- # count users traffic # #---------------------------------------------------- #download ipfw add 47 count all from any to 192.168.0.11 out recv fxp0 ipfw add 49 count all from any to 192.168.0.101 out recv fxp0 ipfw add 51 count all from any to 192.168.0.102 out recv fxp0 ipfw add 53 count all from any to 192.168.0.104 out recv fxp0 #upload ipfw add 48 count all from 192.168.0.11 to any out xmit fxp0 ipfw add 50 count all from 192.168.0.101 to any out xmit fxp0 ipfw add 52 count all from 192.168.0.102 to any out xmit fxp0 ipfw add 54 count all from 192.168.0.104 to any out xmit fxp0 #---------------------------------------------------- # count traffic passed through the server # #---------------------------------------------------- ipfw add 90 count all from any to 192.168.0.100 out recv fxp0 ipfw add 91 count all from 192.168.0.100 to any out xmit fxp0 ipfw add 92 count all from any to 192.168.1.100 out recv fxp0 ipfw add 93 count all from 192.168.1.100 to any out xmit fxp0
#!/bin/sh #---------------------------------------------------- # delete all loaded rules # #---------------------------------------------------- ipfw -f flush ipfw -f pipe flush #---------------------------------------------------- # let the packets pass from and to gateway's NICS # #---------------------------------------------------- ipfw add 200 allow ip from any to 192.168.0.100 ipfw add 201 allow ip from 192.168.0.100 to any ipfw add 202 allow ip from any to 192.168.1.100 ipfw add 203 allow ip from 192.168.1.100 to any
#minute hour mday month wday who command 5 0 * * * root /etc/firewall_night 5 8 * * * root /etc/firewall_day 55 23 * * * root /etc/firewall_deny_access 54 23 * * * root /usr/billing/get_stat 55 7 * * * root /etc/firewall_deny_access 54 7 * * * root /usr/billing/get_stat */1 * * * * root /usr/billing/get_current.pl
#!/usr/bin/perl -w
$prefix_data = "/usr/billing/data/";
$prefix_stats = "/usr/billing/stats/";
@ipfw_output = `ipfw -a list`;
for ($row = 0; $row <= $#ipfw_output; $row++){
@one_row = split /\s+/, $ipfw_output[$row];
for ($column = 0; $column <= $#one_row; $column++){
$lines[$row][$column] = $one_row[$column];
}
}
$filename = $prefix_stats . "current" . "-formatted.txt";
open FILE, "> $filename" or die "Can't open $filename : $!";
for ($row = 0; $row <= $#ipfw_output; $row++){
if (($lines[$row][6] eq '192.168.0.21' || $lines[$row][6] eq '192.168.0.11') && $lines[$row][3] eq 'count'){
print FILE "-" x 20;
print FILE "\nDOPEY has sent a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
print FILE "=" x 20;
}
if (($lines[$row][8] eq '192.168.0.21' || $lines[$row][8] eq '192.168.0.11') && $lines[$row][3] eq 'count'){
print FILE "=" x 20;
print FILE "\nDOPEY has received a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
}
if (($lines[$row][6] eq '192.168.0.111' || $lines[$row][6] eq '192.168.0.101') && $lines[$row][3] eq 'count'){
print FILE "-" x 20;
print FILE "\nSHURIK has sent a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
print FILE "=" x 20;
}
if (($lines[$row][8] eq '192.168.0.111' || $lines[$row][8] eq '192.168.0.101') && $lines[$row][3] eq 'count'){
print FILE "=" x 20;
print FILE "\nSHURIK has received a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
}
if (($lines[$row][6] eq '192.168.0.114' || $lines[$row][6] eq '192.168.0.104') && $lines[$row][3] eq 'count'){
print FILE "-" x 20;
print FILE "\nSEREGA has sent a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
print FILE "=" x 20;
}
if (($lines[$row][8] eq '192.168.0.114' || $lines[$row][8] eq '192.168.0.104') && $lines[$row][3] eq 'count'){
print FILE "=" x 20;
print FILE "\nSEREGA has received a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
}
if (($lines[$row][6] eq '192.168.0.122' || $lines[$row][6] eq '192.168.0.102') && $lines[$row][3] eq 'count'){
print FILE "-" x 20;
print FILE "\nDOWNLOADER has sent a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
print FILE "=" x 20;
}
if (($lines[$row][8] eq '192.168.0.122' || $lines[$row][8] eq '192.168.0.102') && $lines[$row][3] eq 'count'){
print FILE "=" x 20;
print FILE "\nDOWNLOADER has received a total of\n\t$lines[$row][1] packets\nwhich makes\n\t$lines[$row][2] bytes\nor\n\t" . $lines[$row][2]/1024/1024 . " megabytes";
print FILE "\n\nCounter data:\n\t$ipfw_output[$row]";
}
}
close FILE;
`cp $filename $prefix_data`;
))==================== DOPEY has received a total of 5101 packets which makes 3375285 bytes or 3.21892261505127 megabytes Counter data: 00047 5101 3375285 count ip from any to 192.168.0.21 out recv fxp0 -------------------- DOPEY has sent a total of 4980 packets which makes 618532 bytes or 0.589878082275391 megabytes Counter data: 00048 4980 618532 count ip from 192.168.0.21 to any out xmit fxp0 ======================================== SHURIK has received a total of 949 packets which makes 686263 bytes or 0.654471397399902 megabytes Counter data: 00049 949 686263 count ip from any to 192.168.0.111 out recv fxp0 -------------------- SHURIK has sent a total of 837 packets which makes 92350 bytes or 0.0880718231201172 megabytes Counter data: 00050 837 92350 count ip from 192.168.0.111 to any out xmit fxp0 ======================================== SEREGA has received a total of 7835 packets which makes 7874950 bytes or 7.5101375579834 megabytes Counter data: 00051 7835 7874950 count ip from any to 192.168.0.114 out recv fxp0 -------------------- SEREGA has sent a total of 6953 packets which makes 707761 bytes or 0.674973487854004 megabytes Counter data: 00052 6953 707761 count ip from 192.168.0.114 to any out xmit fxp0 ====================
dopey 05 июн 2005, 23:42
Profi the same писал(а):Трафик Инспектор
Если есть триальный ключ, можно воспользоваться таким способом для его продления. Дату надо подставлять когда триал-ключ работает.
Пишем командный файлик: restrt.cmd
Echo ТОРМОЗИМ Трафик Инспектор...
net stop "Traffic Inspector"
ECHO Подменяем дату нанапример на 10.12.2004
date /t >currdate.txt
date 10.12.2004
ECHO Запускаем Трафик Инспектор...
net start "Traffic Inspector"
choice /T:Y,10 "ждем 20 сек, чтобы ТИ одумался..."
Echo Возвращаем дату на место
date <currdate.txt
И усё
dopey 06 июн 2005, 00:13
Bill 07 июн 2005, 02:56
!
! Шинкевич Владимир 07 июн 2005, 13:10
dopey писал(а):У меня где-то на винте валяется версия v1.0.0.98 вместе с keymaker-ом.
И, вааще, на каком-то форуме люди говорили что можно вечно пользоваться trial ключем:
Гость 10 июл 2005, 13:35
dopey писал(а):И еще...
Сегодня утром в книжке от модема (ZyXEL OMNI ADSL LAN) заметил что там целая куча разных полезностей.
Кажется там есть и траффик шейпинг и даже учет траффика!
Надеюсь ты не выбрал USB вариант...
И очень советую почитать книжку а потом поделиться впечатлениями.
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 13
